 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PM10CZF120 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 IntellimodTM Modules Three Phase Converter IGBT Inverter Output 10 Amperes/1200 Volts A AF AG C D NXQXQXQ Y 123 456 789 10 12 14 11 13 15 AA AC 2-S J TERMINAL CODE 1. VUPC 11. VN1 2. UP 12. UN 3. VUP1 13. VN 4. VVPC 14. WN 5. VP 15. FO 6. VVP1 16. P 7. VWPC 17. N 8. WP 18. U 9. VWP1 19. V 10. VNC 20. W 2-R L 2.0 0.1 (t = 0.5) T P AD Z AE P N U V W AB GF 1 AB M M E B M M AA U 0.6 0.1 (t = 0.4) AD K M + NC W U N P V GND GND OUT Si OUT Si GND GND OUT Si GND GND OUT Si GND GND Vcc TEMP OUT Fo IN Si GND GND OUT Si GND GND Description: Powerex IntellimodTM Intelligent Power Modules are isolated base modules designed for power switching applications operating at frequencies to 20kHz. Built-in control circuits provide optimum gate drive and protection for the IGBT and free wheel-diode power devices. Features: Complete Output Power Circuit Gate Drive Circuit Protection Logic - Short Circuit - Over-Current - Over Temperature - Under Voltage Applications: Inverters UPS Motion/Servo Control Power Supplies Ordering Information: Example: Select the Complete part number from the table below -i.e. PM10CZF120 is a 1200V, 10 Ampere IntellimodTM Intelligent Power Module. Type PM Current Rating Amperes 10 VCES Volts (x 10) 120 Vcc Vcc Vcc Vcc Fo IN Th Vcc Fo IN IN IN IN VUP1 UP VUPC VVP1 VP VVPC VWPC WP UN VWP1 VN Fo RFo VN1 WN VNC NC IF VD1 IF VD2 VD3 IF INTERFACE WHICH IS THE SAME AS THE U-PHASE VD4 Outline Drawing and Circuit Diagram Dimensions A B C D E F G J K L M N P Q Inches 3.860.04 3.430.02 2.99 2.30 2.200.03 2.210.04 1.730.03 0.83 0.710.04 0.61 0.550.01 0.56 0.320.02 0.40 Millimeters 98.01.0 87.00.5 76.0 58.42 56.00.8 56.01.0 44.00.8 21.0 18.01.0 15.5 14.00.3 14.29 8.00.5 10.16 Dimensions R S T U X Y Z AA AB AC AD AE AF AG Inches 0.22 Dia. 0.24 Rad. 0.14 0.120.02 0.10.01 0.10.01 0.24 0.12 0.69 0.16 0.10 2.76 0.22 0.22 Millimeters 5.5 Dia. 6.0 Rad. 3.5 3.00.5 2.540.3 2.540.3 6.0 3.0 17.5 4.0 2.5 70.0 5.5 5.5 499 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PM10CZF120 IntellimodTM Modules Three Phase Converter IGBT Inverter Output 10 Amperes/1200 Volts Absolute Maximum Ratings, Tj = 25 C unless otherwise specified Characteristics Junction Temperature Storage Temperature Case Operating Temperature Mounting Torque M5 Mounting Screws Module Weight (Typical) Supply Voltage Protected by OC and SC (VD = 13.5 ~ 16.5V, Inverter Part) Isolation Voltage, AC 1 minute, 60Hz Sinusoidal Symbol Tj Tstg TC - - VCC(prot) VRMS PM10CZF120 -20 to 150 -40 to 125 -20 to 100 17 80 800 2500 Units C C C in-lb Grams Volts Volts Control Sector Supply Voltage Applied between (VUP1-VUPC, VVP1-VVPC, VWP1-VWPC, VN1-VNC) Input Voltage Applied between (UP, VP, WP, UN, VN, WN) Fault Output Supply Voltage (Applied between FO and VNC) Fault Output Current VD VCIN VFO IFO 20 20 20 20 Volts Volts Volts mA IGBT Inverter Sector Collector-Emitter Voltage (VD = 15V, VCIN = 15V) Collector Current, Peak Collecotr Current, Supply Voltage (Applied between P-N) Supply Voltage, Surge (Applied between P-N,) Collector Dissipation VCES IC ICP VCC VCC (surge) PC 1200 10 20 900 1000 62 Volts Amperes Amperes Volts Volts Watts 500 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PM10CZF120 IntellimodTM Modules Three Phase Converter IGBT Inverter Output 10 Amperes/1200 Volts Electrical and Mechanical Characteristics, Tj = 25 C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Control Sector Over Current Trip Level Short Circuit Trip Level Over Current Delay Time Over Temperature Protection OC SC toff(OC) OT OTR Supply Circuit Under Voltage Protection UV UVR Supply Voltage VD ID VCIN(on) VCIN(off) fPWM IFO(H) IFO(L) Minimum Fault Output Pulse Width tFO -20C Tj 125C, VD = 15V -20C Tj 125C, VD = 15V VD = 15V Trip Level Reset Level Trip Level Reset Level Applied between VUP1-VUPC, VVP1-VVPC, VWP1-VWPC, VN1-VNC Circuit Current VD = 15V, VCIN = 15V, VN1-VNC VD = 15V, VCIN = 15V, VXP1-VXPC Input ON Threshold Voltage Input OFF Threshold Voltage PWM Input Frequency Fault Output Current Applied between UP, VP, WP, UN, VN, WN 3-O Sinusoidal VD = 15V, VFO = 15V VD = 15V, VFO = 15V VD = 15V - - 1.2 1.7 - - - 1.0 18 7 1.5 2.0 15 - 10 1.8 25 10 1.8 2.3 20 0.01 15 - mA mA Volts Volts kHz mA mA mS 15 - - 100 - 11.5 - 13.5 27 41 10 110 90 12.0 12.5 15.0 - - - 120 - 12.5 - 16.5 Amperes Amperes S C C Volts Volts Volts 501 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PM10CZF120 IntellimodTM Modules Three Phase Converter IGBT Inverter Output 10 Amperes/1200 Volts Electrical and Mechanical Characteristics, Tj = 25C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units IGBT Inverter Sector Collector-Emitter Cutoff Current ICES VEC VCE(sat) VCE = VCES, VD = 15V, Tj = 25C VCE = VCES, VD = 15V, Tj = 125C FwDi Forward Voltage Collector-Emitter Saturation Voltage -IC = 10A, VD = 15V, VCIN = 15V VD = 15V, VCIN = 0V, IC = 10A, Tj = 25C VD = 15V, VCIN = 0V, IC = 10A, Tj = 125C Inductive Load Switching Times ton trr tC(on) toff tC(off) VD = 15V, VCIN = 0 ~ 15V, VCC = 600V, IC = 10A, Tj = 125C, Inductive Load 0.3 - - - - 0.6 0.15 0.3 1.8 0.8 1.3 - 1.0 3.3 1.5 S S S S S - - - - - - - 2.5 2.7 2.5 1 10 3.5 3.7 3.4 mA mA Volts Volts Volts Thermal Characteristics Characteristic Junction to Case Thermal Resistance Symbol Rth(j-c)Q Rth(j-c)D Contact Thermal Resistance Rth(c-f) Condition Each IGBT Each FWDi Case to Fin Per Module, Thermal Grease Applied Min. - - - Typ. - - - Max. 2.0 5.5 0.067 Units C/Watt C/Watt C/Watt Recommended Conditions for Use Characteristic Supply Voltage Symbol VCC VD Input ON Voltage Input OFF Voltage PWM Input Frequency Minimum Dead Time VCIN(on) VCIN(off) fPWM tDEAD Condition Applied across P-N Terminals Applied between VUP1-VUPC, VN1-VNC, VVP1-VVPC, VWP1-VWPC Applied between UP, VP, WP, UN, VN, WN Using Application Circuit Input Signal 0 ~ 0.8 4.0 ~ VD 5 ~ 20 3.0 Volts Volts kHz S Value 0 ~ 800 15 1.5 Units Volts Volts 502 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PM10CZF120 IntellimodTM Modules Three Phase Converter IGBT Inverter Output 10 Amperes/1200 Volts SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) OUTPUT CHARACTERISTICS (TYPICAL) 3 COLLECTOR-EMITTER SATURATION VOLTAGE VCE(sat), (VOLTS) SATURATION VOLTAGE VCE(sat), (VOLTS) 3 COLLECTOR CURRENT, IC, (AMPERES) 10 Tj = 25oC VD = 17V 15 13 VD = 15V VCIN = 0V Tj = 25oC Tj = 125oC 2 2 5 1 1 IC = 10A VCIN = 0V Tj = 25oC Tj = 125oC 0 0 2 4 6 8 10 COLLECTOR CURRENT, IC, (AMPERES) 0 0 12 14 16 18 20 SUPPLY VOLTAGE, VD, (VOLTS) 0 0 1 2 3 COLLECTOR-EMITTER VOLTAGE, VCE(sat), (VOLTS) SWITCHING TIME VS. COLLECTOR CURRENT (TYPICAL) SWITCHING TIME VS. COLLECTOR CURRENT (TYPICAL) REVERSE RECOVERY CURRENT VS. COLLECTOR CURRENT (TYPICAL) 101 VCC = 600V VD = 15V Tj = 25oC Tj = 125oC 101 REVERSE RECOVERY TIME, trr, (AMPERES) 100 VCC = 600V VD = 15V Tj = 25oC Tj = 125oC 102 VCC = 600V VD = 15V Tj = 25oC Tj = 125oC REVERSE RECOVERY CURRENT, Irr, (AMPERES) 100 toff SWITCHING TIMES, tc(on), tc(off), (s) SWITCHING TIMES, t(on), t(off), (s) 100 tc(off) 10-1 trr Irr 101 ton tc(on) 10-1 10-1 100 101 102 10-1 100 101 COLLECTOR CURRENT, IC, (AMPERES) 102 10-2 100 100 101 COLLECTOR CURRENT, IC, (AMPERES) 102 COLLECTOR CURRENT, IC, (AMPERES) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL) 102 DIODE FORWARD CURRENT, -IC, (AMPERES) VD = 15V Tj = 25oC Tj = 125oC 101 100 0 1 2 3 4 DIODE FORWARD VOLTAGE, VEC, (VOLTS) 503 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PM10CZF120 IntellimodTM Modules Three Phase Converter IGBT Inverter Output 10 Amperes/1200 Volts TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT) TRANSIENT IMPEDANCE, Zth(j-c), (NORMALIZED VALUE) TRANSIENT IMPEDANCE, Zth(j-c), (NORMALIZED VALUE) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (FWDi) 101 101 100 100 10-1 10-1 10-2 SINGLE PULSE STANDARD VALUE = Rth(j-c)Q = 2.0oC/W 10-2 SINGLE PULSE STANDARD VALUE = Rth(j-c)D = 5.5oC/W 10-3 10-3 10-2 10-1 TIME, (s) 100 101 10-3 10-3 10-2 10-1 TIME, (s) 100 101 504 |
Price & Availability of PM10CZF120
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |